Ford 9 inch 1968 - 72 Chevelle A-Body Rear End Housing Kit with 31 spline axles

Description

General Motors 1968 - 1972 A Body New Flanged Housing 62.5" Stock pinion Location with Big Ford Housing Ends
Wheel mounting flange to wheel mounting flange will be 62.5" with axles installed
1968-1972 Chevelle, Cutlass, Regal, Lemans, GTO, etc.  62.5" track width with brakes installed.
Stock rear end pinion yoke location between wheel flanges when center section is installed.
Standard driveshaft location to the passenger side exactly like a General Motors rear.
New Stamped Housing with new 3" x .188" wall DOM tubes
new studs installed in housing
Big Ford Housing Ends; New Style (torino) with .375" (3/8") bolt holes
3/8" Torino 4 bolt axle retainers
3/8" T-bolt kits
flanged 31 spline axle axles have 3.15" bearings installed
axles are cut to length to match the housing
CHOOSE
D
rain plug; None OR
3/4 npt if requested when you order.
SPECIFY
if you are running drum or disc brakes (brakes not included)
SPECIFY
2 3/8" or 2 1/2" axle offset for brakes
CHOOSE
Axles have three bolt patterns in all axles, 5 x 4.5" small ford, 5 x 4.75" GM and 5 x 5".  Choose which pattern you want the wheel studs installed.
CHOOSE
1/2" press in wheel studs; short for custom wheels OR  1/2" Moroso 3" Long for Racing with quick start
You must send us a message with all the CHOOSE & SPECIFY answers before we can start building your housing axle kit.
Usually it will take 4-5 business days to build your housing kit and package it for shipping.
SHIP VIA UPS GROUND OR SPEEDEE DELIVERY IN THE UPPER MIDWEST
WARNING: Cancer And Reproductive Harm-
www.P65Warnings.ca.gov