Pair of 9" Ford 28 spline Cut to Length Big Bearing Axles with hardware

Description

Pair of Ford 9 Inch Cut to Length 28 spline Big Bearing Axles and hardware.
Exactly the parts shown in the picture.  Axles, PA20set bearings installed, axle retainers, t-bolts and 1/2" wheel studs.
Big bearing 9" Ford Axles with 2.5" brake spacing.
Flanged 28 spline axle axles have 3.15" tapered bearings installed
Axles have 9 plus inches of inner spline and you can cut the axle down to 2" of inner spline as the minimum.
Long axle is 33.0" long with 9.25 inches of inner spline.
Short axle is 29.5" long with 10 inches of inner spline.
Axles have three bolt patterns in all axles, 5 x 4.5" small ford, 5 x 4.75" GM and 5 x 5".
Hub register size is 3.06" OD.
Flange outside diameter is 5.94" OD.
CHOOSE 4 bolt axle retainers; New Style Big Ford (torino) with .375" (3/8") bolt holes OR Old Style Big Ford with .500" (1/2") bolt holes.  Please look at the item pictures for both patterns.
1/2" press in wheel studs included for street or custom wheels
T-bolt kits to match retainers are included
Axles can be cut to length with a cold saw or abrasive (chop) saw.
We can turn the hub register to 2.78" OD for no extra cost. Please send a note if you want the 2.78" hub register OD.
FREE Shipping and rear end kit will ship via UPS Ground or Speedee Delivery in the Upper Midwest
WARNING: Cancer
And Reproductive Harm-
www.P65Warnings.ca.gov